Open IPT files in your browser (3D viewer, beta)

Open Autodesk Inventor parts (.ipt) in your browser without installing Inventor (beta). The B-rep stored in the part is shown with its exact surfaces, with the overall size in millimetres. The STEP you hand to your CAD keeps the exact surfaces (no triangles). Viewing is free with no signup (up to 50MB per file); saving STL or OBJ needs a free account.

Drop a drawing or 3D model hereor click to browseFree: 1 file, up to 10MBPro: batch multi-select, 100MB, no AI training

Supported formatsImages: AI recognition (beta)Can't upload? Desktop edition (planned)

Can't open a IPT file? Common causes and fixes

An .ipt arrived from someone who uses Inventor, and you do not have it

Drop the .ipt on this page to view it in 3D: front, top and right views, orthographic projection and the overall size in millimetres, then export a STEP for your own CAD.

The result says the save generation has not been qualified

Parts saved by Inventor 2015, 2021, 2022, 2024, 2026 and 2027 are read (2018 is read as a candidate and reported as such). For other generations the error names the generation and only the preview image Inventor saved is shown. Ask the sender for a STEP, or submit the file so the generation can be added.

Part of the shape (a thread, for example) or a body is missing

Curves and surfaces defined by a procedure, such as intersections and blends, use the fits Inventor stored with them. Bodies with geometry that has no stored fit (helical thread surfaces, for example) and bodies whose faces do not close a volume (construction surfaces) are left out; the loss report gives their counts and reasons. Ask the sender for a STEP when the exact shape matters.

The shape differs from what Inventor shows (suppressed features, another model state)

What you see is the shape stored in the file; nothing is recomputed from the feature history. Whether it matches the current model state in Inventor (suppression, other model states) is not verified, so when it differs, save the part again in the state you need, or ask for a STEP.

You want to open an assembly (.iam) or a presentation (.ipn)

Assemblies and presentations are not supported. Open the .ipt of each part, or export the assembly as STEP from Inventor. Drawings (.idw) open and convert as 2D drawings.

Ways to open a received .ipt: Inventor, Autodesk Viewer, or a browser viewer

IPT is the part file of Autodesk Inventor: one file holds the shape (B-rep), the feature history and the properties. Opening one needed Inventor itself, the free Windows-only viewer that only displays (Inventor View, or Inventor's read-only mode), or Autodesk Viewer, which takes an upload under an Autodesk account. zumen-gate shows the shape stored in an .ipt in your browser without Inventor (beta) and writes STL, OBJ or GLB (free) or STEP (pass or Pro); the STEP keeps the stored B-rep rather than triangles.

zumen-gate (this page)Autodesk Viewer (browser)Inventor
InstallationNone (browser)None (Autodesk account needed)Required (subscription)
What is readThe stored B-rep, body by body; no colours yetGeometry, measuring, sections, markupThe original model (editable, with its history)
ExportSTL, OBJ, GLB (free), STEP (pass or Pro)None (view and measure only)STEP, IGES, DWG and more
Best forA quick check of an incoming .ipt, a STEP for your own CADMeasuring, markup and sharingEditing

What is covered for IPT

Export it while you're here

A displayed IPT file exports straight to STL, OBJ or GLB (free, up to 10MB; STL and OBJ with a free account) or STEP (download with a 24-hour pass or Pro) — pick the output above the convert button (beta). Projection to a 2D drawing (DXF) is planned; other 3D formats are on the 3D viewer page.

IPT viewer — frequently asked questions

Which Inventor versions' IPT files are supported?

Parts saved by Inventor 2015, 2021, 2022, 2024, 2026 and 2027 (beta). Inventor 2018 is read as a candidate, a generation framed like the reviewed ones, and the loss report says so. Other generations cannot be read; the generation is named.

Is the displayed shape exact? Are colours shown?

The B-rep stored in the part is read with its exact surfaces and tessellated for display. Curves and surfaces defined by a procedure (intersections, blends, offsets) use the B-spline fits Inventor stored with them; their counts and the fit tolerance are in the loss report. Colours (appearances) are not read yet, so the default colour is used.

What happens to the surfaces in the STEP?

The surfaces stay the stored B-rep (planes, cylinders, free-form surfaces), so unlike the triangular faces built from SOLIDWORKS display meshes, your CAD can edit them. Bodies are written as Body_1, Body_2 and so on, without colours. The STEP download needs a 24-hour pass (¥480, about US$3) or Pro; saving STL, OBJ or GLB is free up to 10MB (STL and OBJ with a free account).

Can it open assemblies (IAM) or drawings (IDW)?

Drawings (.idw) open as 2D drawings and convert to DXF, PDF and more (beta). Assemblies (.iam) and presentations (.ipn) are not supported.