Convert IPT to STEP Structuralβ

Writes Autodesk Inventor 部品 (IPT) as STEP (beta). View it in 3D in your browser; downloading the STEP needs a 24-hour pass (¥480, about US$3) or Pro.

  1. 01Drop your 3D model
  2. 02Pick a format & export
  3. 03Check the 3D view & download
Drop a drawing or 3D model hereor click to browseFree: 1 file, up to 10MBPro: batch multi-select, 100MB, no AI training

Supported formatsImages: AI recognition (beta)Can't upload? Desktop edition (planned)

When you need this

About converting IPT to STEP

An Inventor part (.ipt) does not open without Inventor. The free Inventor View only displays and runs on Windows, so the usual answer was to ask the sender for a STEP. zumen-gate reads the IPT directly (no Inventor installation) and writes the B-rep stored in the part as STEP with its surfaces intact, so SOLIDWORKS, Fusion or FreeCAD can open, measure, assemble and edit it. Curves and surfaces defined by a procedure, such as intersections and blends, use the fits Inventor stored with them; their counts and the fit tolerance are in the loss report. Parts saved by Inventor 2015, 2021, 2022, 2024, 2026 and 2027 are read (2018 as a candidate, reported as such); save generations that have not been reviewed are refused with the generation named. What is written is the stored shape: whether it matches the current model state in Inventor is not verified. Colours (appearances) and assemblies (.iam) are not supported.

IPT is the part file of Autodesk Inventor. It does not open without an Inventor licence, and the free Inventor View only displays and runs on Windows, so the usual way to use an incoming IPT in another CAD was to ask the sender for a STEP. zumen-gate shows the B-rep stored in the part in your browser without Inventor (beta) and writes STL, OBJ or GLB (free) or STEP (pass or Pro); the STEP keeps the stored B-rep rather than triangles. Parts saved by Inventor 2015, 2021, 2022, 2024, 2026 and 2027 are read (2018 as a candidate); colours (appearances) are not read and assemblies (.iam) are not supported.

The exported STEP opens in SOLIDWORKS, Inventor, Fusion, CATIA, FreeCAD and other CAD systems; choose AP214 (default, most widely read), AP203 or AP242. From STEP or IGES the file is re-written with its product structure, placements, names and colours and the surfaces (B-rep) unchanged. From STL, OBJ or SOLIDWORKS the STEP is built from the display triangles (closed parts become solids): any CAD opens it, but every face is a triangle and the original cylinders and planes are not recovered (up to about 250,000 triangles, each repeated part counted once; above that AP242 keeps the mesh as tessellated geometry). Downloading needs a 24-hour pass (¥480, about US$3) or Pro.

3D models are read through a common intermediate representation (cad3d-ir), and every export comes with a loss report listing what is not shown or written (PMI, layers, materials, zero-area triangles). Exported files are read back in tests to confirm the triangle count and extents match.

IPT → STEP converter — frequently asked questions

Is the STEP export free?

Viewing and the loss report are free with no signup; downloading the STEP needs a 24-hour pass (¥480, about US$3) or Pro. Saving STL, OBJ and GLB stays free up to 10MB (STL and OBJ with a free account).

Which STEP schema should I choose (AP203 / AP214 / AP242)?

AP214, the default, is read most widely. Choose AP203 for older CAD and AP242 when the recipient needs the current schema (the one with PMI). The B-rep Inventor stored in the part is written body by body; the faces stay planes, cylinders and free-form surfaces, not triangles, and curves and surfaces defined by a procedure (intersections, blends) are written from the fits Inventor stored with them.

Are colours and part names kept?

The bodies are written in their stored order as Body_1, Body_2 and so on. Colours (appearances) are not read, so none are written. Bodies with geometry that has no stored fit (helical thread surfaces, for example) and bodies whose faces do not close a volume (construction surfaces) are left out as well; the loss report lists their counts and reasons.

Will the shape change when exporting IPT to STEP?

3D models are read through a common intermediate representation (cad3d-ir), and the loss report lists what could not be shown or written (PMI, layers, materials, zero-area triangles). Exported STEP and STL files are read back in tests to confirm the triangle count and extents match.

Is there a limit on conversions or downloads?

Viewing and the loss report are free and unlimited with no account. Downloading the STEP, and saving models over 10MB, needs a 24-hour pass or Pro (up to 100MB). STL, OBJ and GLB saves are free up to 10MB (STL and OBJ with a free account).

What happens to the files I upload?

Transfers and storage are encrypted, and your drawings are never sold or shared with third parties. On the free tier, uploads are used to improve the service and train our AI models, so please avoid uploading confidential drawings (a no-training Pro plan is available). See the data policy page for details.

Related conversions