Open SLDASM files in your browser (3D viewer, beta)
Rotate SOLIDWORKS assemblies (.SLDASM) in your browser without installing SOLIDWORKS (beta). The assembly file carries the display meshes of every component, so the assembly shows assembled, with the saved placements, without the part files (.SLDPRT). Viewing is free with no signup (up to 50MB per file); saving STL or OBJ needs a free account.
Supported formatsImages: AI recognition (beta)Can't upload? Desktop edition (planned)
Can't open a SLDASM file? Common causes and fixes
No SOLIDWORKS at hand, or the part files are missing
Drop the .SLDASM alone on this page to view it in 3D. Component shapes and placements come from the assembly file, so the .SLDPRT files are not needed.
Some components of a nested subassembly pile up at the origin
Components of nested subassemblies keep their stored coordinates because their placement is not read; the loss report counts them. A STEP export from SOLIDWORKS shows them placed.
The file is over 50MB or has very many components
The free limit is 50MB per file. For large assemblies, ask the sender for a version with unneeded parts removed or simplified.
Ways to open an assembly: eDrawings, SOLIDWORKS or a browser viewer
SLDASM references its part files (.SLDPRT), so SOLIDWORKS and eDrawings need the parts too (unless the sender packs everything into an EASM). zumen-gate uses the display meshes stored inside the assembly file, so the .SLDASM alone shows the assembled model.
| zumen-gate (this page) | eDrawings Viewer | SOLIDWORKS | |
|---|---|---|---|
| Part files | Not needed (display data inside the assembly) | Needed (not for EASM) | Needed |
| Installation | None (browser) | Required | Required, plus a licence |
| What is read | Saved display meshes and placements | Exact geometry, dimensions, annotations | Everything, including mates and history |
| Export | STL, OBJ, GLB (free), STEP (pass or Pro) | None | STEP, IGES and more |
| Best for | A quick check of an incoming .SLDASM, a STEP to pass on | Exact measurements, exploded views | Editing |
What is covered for SLDASM
- Read (beta): SOLIDWORKS 2015–2026 assemblies (.SLDASM). The display meshes of every component stored in the assembly file are placed with the saved component transforms; the part files are not needed
- Files saved by SOLIDWORKS 2023 and later also place the components of nested subassemblies; in older files those components keep their stored coordinates because their placement is not read (listed in the loss report). Hidden and suppressed components are not shown
- Export (beta): STL, OBJ and GLB are free (up to 10MB); STEP needs a pass or Pro and writes each part once from triangular faces and places it like the assembly, with names and colours (up to about 250,000 triangles, each repeated part counted once; above that AP242 keeps the mesh as tessellated geometry). Viewing is free up to 50MB
Export it while you're here
A displayed SLDASM file exports straight to STL, OBJ or GLB (free, up to 10MB; STL and OBJ with a free account) or STEP (download with a 24-hour pass or Pro) — pick the output above the convert button (beta). Projection to a 2D drawing (DXF) is planned; other 3D formats are on the 3D viewer page.
SLDASM viewer — frequently asked questions
Do I need the part files (.SLDPRT)?
No. SOLIDWORKS writes the display meshes of every component into the assembly file when it saves, so the .SLDASM alone is enough, external references included.
Are the placements exact?
Each component uses the transform stored in the assembly. The result was checked against a STEP export of the same assembly. Only components of nested subassemblies stay at their stored coordinates; hidden and suppressed components are not shown.
Can I export to STEP or STL?
Yes (beta). The whole assembly exports as STL, OBJ or GLB (free, up to 10MB; STL and OBJ with a free account) or STEP (24-hour pass or Pro). The STEP writes each part once from triangular faces and places it like the assembly, with names and colours (up to about 250,000 triangles, each repeated part counted once; above that AP242 keeps the mesh as tessellated geometry). Projection to a 2D drawing (DXF) is planned.